Willing New Materials Technology Co.,ltd

Showing 71 - 80 of 100, total 10 pages [First] [Previous] [Next] [Last]

phenolic resin applied in stone wool and frp
Specification: Phenolic Resin applied in Stone Wool and FRP
Detail: product name:Resin for Rock Wool and Fiber Glass specification: Type Appearance Free Phenol£¨%£© Solid Content£¨%£© Viscosity Cp/25¡æ PH Value Water Solubility Usage WL-4004 brown or red tran***rent liquid 7-10 36-42 ¡Ü...

resin for photoresist and electrical industry
Specification: Resin for Photoresist
Detail: product name:Resin for Photoresist specification: Type Free Phenol Monomers £¨%£© Shade £¨G£© Electrical Conductivity£¨us/cm£© Softening Point £¨¡æ£© Usage WL-8012 ¡Ü0.5 ¡Ü3 ¡Ü10 135-150 Resin for Photoresist ...

alkylphenol formaldehyde resin
Specification: Octyl-phenolic Trackifying Resin
Detail: Type Appearance Softening Point Methylol Content£¨ % £© Acid Value (%) Heat Loss Ash Content WL-2203 yellow or brown flakes or granule 85-105 <1.0 55¡À10 ¡Ü1.0 ¡Ü0.1 Package and Storage: Packed in 25kgs woven paper bags l...

alkylphenol formaldehyde resin
Specification: Octyl-phenolic Trackifying Resin
Detail: product name:Octyl-phenolic Trackifying Resin specification: Type Appearance Softening Point Methylol Content£¨ % £© Acid Value (%) Heat Loss Ash Content WL-2203 yellow or brown flakes or granule 85-105 <1.0 55¡À10 ¡Ü1....

phenolic resin applied in abrasives tools
Specification: Resin for Heavy Load Grinding Wheel, Finishing Wheel
Detail: product name:Resin for Heavy Load Grinding Wheel, Finishing Wheel specification: Type Flow £¨mm£© Hexamine £¨%£© Cure @150¡æ£¨sec£© Free Phenol £¨%£© Usage WL-1308 20-30 12.5-13.5 60-80 3-5 large-diameter abrasive c...

insoluble sulfur
Specification: HS OT33
Detail: Item Specifications HS OT10 HS OT20 HS OT33 HS IS90 IS60 Appearance Yellow powder Total Sulfur Content 90.0%¡À1.0% 80.0%¡À1.5% 67.0%¡À1.0% ¡Ý99.5% Insoluble Sulfur ¡Ý81.0% ¡Ý72.0% ¡Ý56.0% ¡Ý90.0% ¡Ý60.0% Oil Content 10...

phenolic resin applied in abrasives tools
Specification: General Resin Sections, Grinding Resin Section, and PowderResin
Detail: Type Flow £¨mm£© Hexamine£¨%£© Cure @150¡æ£¨sec£© Free Phenol £¨%£© Usage WL-1103 18-30 8.5-9.5 90-110 ¡Ü2.0 general type grinding wheel WL-1105 22-35 8.5-9.5 65-90 ¡Ü2 used for complete sections WL-1105A 24-34 6.5-7.5...

alkylphenol formaldehyde resin
Specification: Alkylphenol Formaldehyde Resin
Detail: product name:Octyl-phenolic Trackifying Resin specification: Type Appearance Softening Point Methylol Content£¨ % £© Acid Value (%) Heat Loss Ash Content WL-2203 yellow or brown flakes or granule 85-105 <1.0 55¡À10 ¡Ü1....


Showing 71 - 80 of 100, total 10 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6 7 8 9 10